Blog

PREQUAL COMPLETE! Today we completed the prequal. We used the…

This update covers three pool tests, held on the following…

Today we had the first pool test of the summer!…

This is our last pool test of the semester. We…

Today our goal was to try to complete the prequal…

We attached a much wider base to the marker, which…

We remapped the joystick inputs and it now works as…

During testing, we noticed that replacing the markers took quite…

Before the test: Last night, Philip finished wiring the Ping1D.…

We added Duke Robotics Club labels to the chairs, table,…

Before the Test: Everything in the lab was good before…

8:00 AM – 9:30 AM We got to the pool…

The torpedo launcher we’ve been constructing features two cylindrical tubes…

Before the Test: Everything in the lab was good before…

This mount is adapted from the battery mount, but because…

Before the test: One side of the 3D print for…

We got to the pool at 2:45 PM due to…

On the first day of March, water leaked into the…

We got to the pool at 2:30 PM due to…

Our new system was designed to be just as flexible…

Marker Enclosure For our marker enclosure, we chose a crescent-shaped…